top of page

32MM Gauge Only 

£160 (including P&P within the UK - for international shipping contact us here


Released at Elsecar (September 2022), this locomotive kit is our interpretation of the Ffestiniog Railways' George England 0-4-0T in its original form.

Codenamed DRAGONFLY, the model comes complete with a tender kit, this 16mm scale locomotive is built from 3D printed filament & resin parts, and laser-cut acrylic and utilises our adaption of the Binnie Engineering 29mm wheel, creating an effective driving wheelset.

It comes complete with a 3-6volt motor, nylon worm gears, Binnie Engineering 29mm wheels on 1/8" stainless steel axles, and all necessary metal stock, nuts, screws & washers required to build the model in the photos.

Also included in the kit is a micro slide switch (with a corresponding laser cut hole in the footplate) and a selection of resin-printed detail parts.


We do recommend access to a small "bench vice" to build this kit.


Building instructions are included with the kit.


Although not for beginners, the kit is reasonably easy to construct and requires basic tools, glue, paint and batteries to complete.

There is adequate room in the boiler & tanks for four “AA” batteries or a 3.7V Lipo battery and a Locoremote or other RC units.

Batteries, Loco Remote or any electrics (except micro switch) are not included in the kit.

Length (over buffers) - 335mm

Width (across cylinders) - 82mm

Height (from railhead to chimney top) - 120mm

Rigid Wheelbase – 72mm


Display model colours -
Halfords - Matt Black
Halfords - Fiat Capri Blue


    bottom of page